Falcon Kart Chassis Range.

High-precision tube cutting and welding are performed using laser technology machines, while tube bending is processed through high-tech CNC machines.

PDB MINI KART 950mm

The PDB Mini Kart chassis is made of seamless special CrMo steel tubes of 28mm diameter.

High-precision tube cutting and welding are performed using laser technology machines, while tube bending is processed through high-tech CNC machines. Chassis is available 950mm for Mini and Cadets.

The 30mm rear axle is supported by two bearings, and it’s available in three different pipe compounds: soft, medium and hard.

Wheels are 145/110, made of aluminium and heat-treated.

The new aerodynamic streamlined bodyworks Eurostar Mini are designed and produced within Parolin Racing Kart's facilities. The chassis is powder coated in PDB shiny black colour.

The Mini chassis is available in the motorsport version: having a self-adjusting hydraulic brake system with radial fittings and equipped with top features.

TECHNICAL SPECIFICATIONS
  • Ø Tubes: 28 x 2mm

  • Wheel base: 950mm

  • Rear width: 586mm

  • Front width: 635mm

  • Length: 1300mm

  • Tank capacity: 4 litres

  • Brake system: Hydraulic self adjusting

  • Brake position: Rear radial fitting

  • Rear brake disk: 155 x 4mm

  • Axle: 30 x 5 x 960mm hollow

  • Steering wheel: 300mm black

  • Bodyworks: Eurostar Mini / KG MK14

  • Alloy Wheels: 110-145

  • Homologation: CSAI 08/CH/14

FALCON LE MANS

Chassis are made of seamless special CrMo steel tubes of diameters 30 mm (1.18 in) and 32 mm (1.26 in). High-precision tube cutting and welding are performed using laser technology machines, while tube bending is processed through state of the art CNC machines.

Components are obtained from best aluminium and magnesium solid pieces and then titanium anodized, the first being done with high-tech fully automatized machines and held to tight tolerances. All these operations are performed within Parolin Racing Kart’s facilities.

Stub axles are cut from a single steel piece. Ackerman geometry, camber and caster are easily adjustable thanks to the innovative Eurostar eccentric system. Pedals are made of aluminium and present an ultra-low friction attachment system that provides enhanced sensibility.

Brakes are hydraulic self-adjusting CIK FIA homologated AP RACE 06. Rear brake rotor is 194 x 18 mm or 199,5 x 12 mm in diameter, all made of Cast Iron and ventilated. Optional hand operated front brake is available. Brakes, as all components, are produced within our facilities.

It presents front and rear removable stabilizer bars in order to adjust the rigidity parameters.

Rear axle is supported by three bearings with special cassettes and is 50 mm (1.97 in) in diameter.

The new aerodynamic streamlined bodyworks Eurostar Dynamica and Wings are performed within Parolin Racing Kart's facilities.

Wheels are 210/130, made of magnesium, anodized, heat-treated and present a triple bead retention system. It presents right-left extra seat supports.

TECHNICAL SPECIFICATIONS
  • Ø Tubes and material: Mix 30/32 x 2mm - 25 cr-mo4

  • Wheel base: 1046mm

  • Rear width: 636mm

  • Front width: 718mm

  • Length: 1530mm

  • Tank capacity: 9 litres

  • Brake system: Hydraulic self adjusting

  • Brake position: Standard

  • Rear brake disk: Ventilated 194 x 18mm

  • Axle: 50 x 2 x 1040mm hollow

  • Steering wheel: 320mm black

  • Bodyworks: Eurostar Dynamica

  • Magnesium Wheels: 130-210mm

  • Homologation: 52/CH/20

FALCON LE MANS DD2

Chassis are made of seamless special CrMo steel tubes of diameters 30 mm (1.18 in). High-precision tube cutting and welding are performed using laser technology machines, while tube bending is processed through state of the art CNC machines.

Components are obtained from best aluminium and magnesium solid pieces and then titanium anodized, the first being done with high-tech fully automatized machines and held to tight tolerances. All these operations are performed within Parolin Racing Kart’s facilities.

Stub axles are cut from a single steel piece. Ackerman geometry, camber and caster are easily adjustable thanks to the innovative Eurostar eccentric system. Pedals are made of aluminium and present an ultra-low friction attachment system that provides enhanced sensibility.

Brakes are hydraulic self-adjusting CIK FIA homologated AP RACE 06. Rear brake rotor is 194 x 18 mm or 199,5 x 12 mm in diameter & front brake rotors are 150 x 13 mm or 151,5 x 10 mm in diameter, all made of Cast Iron and ventilated. Brakes, as all components, are produced within our facilities.

It presents front and rear removable stabilizer bars in order to adjust the rigidity parameters.

Rear axle is supported by one bearing with special cassettes and is 40mm diameter.

The new aerodynamic streamlined bodyworks Eurostar Dynamica and Wings are performed within Parolin Racing Kart's facilities.

Wheels are 210/130, made of magnesium, anodized, heat-treated and present a triple bead retention system. It presents right-left extra seat supports.

TECHNICAL SPECIFICATIONS
  • Ø Tubes and material: Mix 30/32 x 2mm - 25 cr-mo4

  • Wheel base: 1046mm

  • Rear width: 636mm

  • Front width: 718mm

  • Length: 1530mm

  • Tank capacity: 9 litres

  • Brake system: Hydraulic self adjusting

  • Brake position: Standard

  • Rear brake disk: Ventilated 194 x 18mm

  • Front brake disks: Ventilated 152 x 10mm

  • Axle: 40 x 3 x 1040mm hollow

  • Steering wheel: 320mm black

  • Bodyworks: Eurostar Dynamica

  • Magnesium Wheels: 130-210mm

  • Homologation: 52/CH/20

FALCON LE MANS KZ2

Chassis are made of seamless special CrMo steel tubes of diameters 30 mm (1.18 in). High-precision tube cutting and welding are performed using laser technology machines, while tube bending is processed through state of the art CNC machines.

Components are obtained from best aluminium and magnesium solid pieces and then titanium anodized, the first being done with high-tech fully automatized machines and held to tight tolerances. All these operations are performed within Parolin Racing Kart’s facilities.

Stub axles are cut from a single steel piece. Ackerman geometry, camber and caster are easily adjustable thanks to the innovative Eurostar eccentric system. Pedals are made of aluminium and present an ultra-low friction attachment system that provides enhanced sensibility.

Brakes are hydraulic self-adjusting CIK FIA homologated AP RACE 06. Rear brake rotor is 194 x 18 mm or 199,5 x 12 mm in diameter & front brake rotors are 150 x 13 mm or 151,5 x 10 mm in diameter, all made of Cast Iron and ventilated. Brakes, as all components, are produced within our facilities.

It presents front and rear removable stabilizer bars in order to adjust the rigidity parameters.

Rear axle is supported by three bearings with special cassettes and is 50 mm (1.97 in) in diameter.

The new aerodynamic streamlined bodyworks Eurostar Dynamica and Wings are performed within Parolin Racing Kart's facilities.

Wheels are 210/130, made of magnesium, anodized, heat-treated and present a triple bead retention system. It presents right-left extra seat supports.

TECHNICAL SPECIFICATIONS
  • Ø Tubes and material: Mix 30/32 x 2mm - 25 cr-mo4

  • Wheel base: 1046mm

  • Rear width: 636mm

  • Front width: 718mm

  • Length: 1530mm

  • Tank capacity: 9 litres

  • Brake system: Hydraulic self adjusting

  • Brake position: Standard

  • Rear brake disk: Ventilated 194 x 18mm

  • Front brake disks: Ventilated 152 x 10mm

  • Axle: 50 x 2 x 1040mm hollow

  • Steering wheel: 320mm black

  • Bodyworks: Eurostar Dynamica

  • Magnesium Wheels: 130-210mm

  • Homologation: 52/CH/20

Interested in getting into one of our chassis? We have a worldwide dealer network setup - get in touch with us.

© 2020 PDB RACING TEAM. ALL RIGHTS RESERVED.